Timer Switch For Letron Motor

The timer switch is for controlling equipment when you want it to turn on and off by setting the time so it runs more efficiently and also save on power. This product is used in many areas varying from street lights, advertising lights, neon lights, production equipment, and house electrical apppliances.

Technical information

Voltage rating: AC 220 V 50/60Hz (Order Voltage 12V, 24V, 36V, 48V, 110V)
Voltage limit: AC 180~250V
Hyteresis:≤ 1 sec/day (25°C)
ON/OFF operation: 16 ON & 16 OFF
Power Consumption: 2VA (max)
Display: LCD
Minimum Interval : 1 Minute
Timing range: 1 min ~ 168h
Load capacity: resistive load: 16A/250V AC
                        lagging load:   10A/250V AC
                        lamp load: 2000W
Switching contact: 1 changeover switch
Power reserve: 3 years (Lithium Battery)
Ambient Tempreture: -20 ~ +55°C
Ambient Humidity: 35% - 38% RH
Dimensions: 60x60x32mm

Instructions

1. To start switch: press reset Key. At the first time, if you want to the present time, please press "Clock" on board, then press D+, H+, M+ to adjust the number to the present time.

2. Enter into programming as belows:

Step	Key	Programming
1	Press "P"	Setting 1 ON time (display 1 on)
2	Press H+/M+	Setting hours and minutes
3	Press D+	To select same every day, or different time each day
4	Press "P"	Setting 1 off time (display 1 off)
5	Press H+/M+	Setting hours and minutes turn off time
6	Press D+	If you want the same every day, you don't need press this key
7	Repeat step 2-6	Set 2-16 on/off time
8	Press "Clock"	End

Note:

1. Time setting should according to the time sequence, couldn't be set crossly.
2. System with quit automatically if there's no operating within 10 seconds and no data is saved.
3. Function 3, 4, 5 can not be used simultaneously.


Whats in the Box:

1 x Digital Timer
1 x Instructional Manual